Wi-Fi Congestion


The range of 2.4GHz frequencies reserved for Wi-Fi is fairly limited and with so many Wi-Fi devices and networks these days, it is not unusual for wireless networks in the same location to share the same frequencies and this results in lower connection speeds and even connection drop outs in extreme situations.

The good news is that the wireless network(s) on your boat, once out at sea, will not be affected by the wireless networks on land or on other boats. That said, these days it is not unusual for larger yachts and powerboats to have two or more wireless networks and so it is really important to ensure that your own wireless networks are working at peak performance and not sharing the same frequencies.

The good news is that most Wireless Routers and Access Points can be configured to work on a specific frequency and so you should be able to ensure that each network is using its own frequency band without any overlaps.

There are affectively 13 frequencies in the 2.4GHz range and each wireless router will use five adjoining frequencies to setup its network. Looking at the diagram above, where each coloured curve is a separate wireless router/network, you can see that in general three frequencies are used; 1, 6 and 11. which allows three routers to work side by side with no overlapping/sharing of frequencies.

So how do you optimise the frequencies used by your wireless networks ? Well first you need to “see” what is going on by carrying out a wireless survey of your boat. This can be done using a number of free programs and apps. Unfortunately Apple do not allow iPhones and iPads to provide this level of Wi-Fi Information so you will need to use a Windows PC or Android device to do your wireless survey.

If you have an Android phone or tablet, then you are in luck as the free App “Wi-Fi Analyzer” is one of the best tools available and created the image above. For Windows PC users then “NetSurveyor” is very good or “WiFiInfoView” which is not so graphical but is only a few hundred Kilobytes in size and needs no installation, so can run straight from your memory stick.

Whichever tool you use, once you have conducted your wireless survey, you will be able to see what frequencies your wireless networks are operating on and decide if you need to change them. All Digital Yacht wireless products can be changed to use a different frequency and should you need to do this, please contact us for instructions.