March 8, 2013

Wiring details for Wireless Class B Transponder

A customer asked us for a wiring diagram to show how one of our AIT2000 Class B Transponders connects to our WLN10HS to create a wireless AIS transponder solution. We were happy to oblige and thought that it would be good to publish this diagram online, as this AIT2000+WLN10HS combo […]
February 16, 2013

RF Connectors + Cables Explained

We often talk to customers about the RF (radio frequency) cables and connectors on their boats and sometimes it is clear that the connector names and cable references that we take for granted are not always recognised by our customers. With this in mind, we decided to publish a new […]
January 31, 2013

Support for AIT250 and AIT1000

  Usually our posts are about the latest and greatest, but with thoughts turning to the new season, I thought I would give some advice on two of our older but very popular products; the AIT250 and AIT1000 Class B Transponders. Both of these two products are based on the […]
December 29, 2012

Important New Update for AIT2000/CLB2000/AIS200N2Net

We have just finished testing and approving an important new firmware update for our popular AIT2000 and CLB2000 Class B Transponders and top of the range AIS200N2Net Receiver. Along with the new firmware, comes a new version of proAIS2 and new Windows Drivers for the USB interface. This new Version […]
December 4, 2012

Combining Wireless Networks on a Boat

With more and more wireless devices going on to boats, it will not be too long before your average medium sized pleasure boat has at least two or more wireless networks. One for the Internet, another for the Sat Phone, perhaps another in the new Multi-Function Display chart plotter, the […]
December 4, 2012

Help ! I Cannot Access My WL510

Our popular WL510 Long Range Wi-Fi adaptor is pre-configured with an optimised set of default settings that for the majority of customers will work perfectly. However, there are many settings and different modes that the WL510 can be changed to and every now and again we will get an email […]
December 4, 2012

More information on using our AIT2000 transponder with OpenCPN on Mac and LINUX PCs

Following on from our previous post on using our AIS products with the popular open source navigation software OpenCPN,  Digital Yacht have released a new Tech Note that explains how to get our latest AIT2000 Class B Transponder working with OpenCPN on a Mac or LINUX PC. Under Windows, there […]
September 20, 2012

New Firmware Update for AIT2000 + CLB2000

Today we have just finished testing and approving a new software update for our popular AIT2000 and CLB2000 Class B Transponders. This is the first update for these products and includes a number of small tweaks to the Alarms, to stop the occasional false alarm that one or two customers have reported. […]